With the gradual increase in labor costs and the promotion of the cleaning equipment market, mechanization replacing manual labor is becoming increasingly apparent. Industrial floor scrubbers have gradually become entry-level cleaning equipment and are widely used in people's lives. Many times, we need to use battery type floor scrubbers.

At this point, the problem arises. As time goes on and application frequency increases, even the best machinery and equipment will inevitably encounter difficulties. At this point, it is necessary to let the application department or users know where the problem is with the floor scrubber, what is probably the cause, and can also effectively "prescribe the right medicine".

When using an industrial floor scrubber for cleaning, a common problem is that the equipment suddenly stops flowing water. How can we solve this problem? Let's discuss with you:

The water volume in the clean water tank is insufficient. When washing the floor without draining water during homework, check the water tank first. If it is not drained, the water tank may run out of water. Inject clean water.

2. The water flow regulation switch has not been turned on. If the water tank is full, if it is not draining, be sure to check the water flow adjustment switch to see if the water flow enters the cleaning equipment switch. If it is closed, start it immediately.

3. Check the filter. If there are no two possibilities mentioned above, then there is only one possibility. Most floor scrubbers have a clean water filter screen, and the reason why they do not drain water is mainly because the clean water filter screen is blocked and there is also dirt in the clean water. Therefore, remove the clean water filter screen and clean it thoroughly before reinstalling it.

There have been some problems with floor cleaning, and users should observe more during use. This can also help maintenance personnel quickly find the problem and carry out repairs when communicating with them.